How To Put Together A Comfort Zone Fan

Condolement Zone xviii inch 2 in 1 Performace Stand Ultra Silence Pedestal Fan

Features:

• Patented eighteen inches plastic grid and vi blades.
• 2 in ane fan: Stand and wall.
• 3 speeds.
• Adjustable stand up to 53.15 in height.
• Wide area oscilation.
• Adaptable tilt head.
• 120 V~ A.C. / 60Hz

Alert : AS ANY OTHER ELECTRIC POWERED FAN, THIS ONE CONTAINS PARTS WHICH DRIVE ELECTRICAL POWER WHILE CONNECTED, EVEN WHEN THE UNIT IS TURNED OFF.

Warning :ELECTRICAL Shock DANGER

Recommendations:

• Utilise grounded outlet only
• Do not use whatever external connections, adapters or timers.
• Do not overcharge the electrical power socket where you connect this household.
• Ever set up the fan on a dry, flat and steady surface. Exercise not handle this fan when having your hands wet. Before you connect the fan to the electric power, brand sure both the string and the socket are completely dry.
• Do not submerge on water or any other liquid. DO NOT USE THE FAN IF IT Vicious INTO Water.

Important Rubber GUIDELINES

• Avert whatever contact with the moving parts of this fan. Keep your hair, hands and feet away from the moving parts of the "stand fan".
• Please keep this fan abroad from children or people with whatever mental or concrete disability, as well as away from those people who has not received the proper instruction on the use of this fan.
• Please exist aware of your children when the "stand fan" is in apply. Practice not allow children to play near the fan. Please make sure to unplug from the electric power the fan every time yous terminate using it and before clean it. Make sure to use but a 120 Volts electric source. Practise non use the "stand fan" if you detect any damage on the unit or the electric power cord.
• Practice non use the "stand fan" if the unit has fallen downward and become damage in whatever mode. Delight take the unit of measurement to your nearest authorized service heart, so that it can be repair, check or adjust.
• Practise non let the "stand up fan" to enter in contact with water or any liquid.
• Do not use this fan exterior.
  Always set the "stand up fan" on a evidently, stable surface in social club to avoid it to autumn.
  Vacuum dust and residuals from the grid and the blades later on unplugging the "stand up fan".
• Do non operate the "stand fan" without the grids gear up. Make sure to turn off the fan whenever unattended. Always remember to unplug from the electric power supply.
• Never leave the fan unattended while plugged in. If the electric connection, cord or plug are damaged, they must be repaired past the manufacturer directly or by someone from an authorized service center. Never use the fan if information technology is damaged on any way, either the unit itself or its cord and plug.
• Keep away the electrical connection cord form sharp edges, as well every bit abroad from the moving parts of the "stand up fan".
• Practise not use the fan if it has fallen downwards and any damaged has been adamant.
• Never fix the fan on wet floor and never mop around the fan itself when operating.
• This fan is not a toy, go on away from children.

Parts identification 1

A.-ST 3x8mm W/Washer Screw: This screw is used to fit the rear grill to the fan motor encompass and is placed before putting the propeller on the motor shaft.

Parts identification ii

1. Front end filigree
2. Back filigree
3. Safety filigree's fixing locks
4. Fan blades
5. Motor shaft
6. Blades nut.
7. Engine torso.
8. Swing pivot
9. Transmission performance Speed/Off/Airplane pilot Calorie-free
10. Pilot light/Night calorie-free
11. Control panel
12. Telescopic tube
13. Height fixing rings
14. Fixing knob
15. Base
16. Counterweight
17. Washer
18. L screw
19. Wall support zipper

ASSEMBLY INSTRUCTIONS

Fan associates:

Prepare the back grid on the motor shaft, make sure thatthe internal pointer (as it is draw in the enhancement inside Fig. B) points up and the 4 key clips fit. You might push firmly in order to make them tightly fit. One time the four clips have been fix, brand certain they are tight (Fig. C).

Take the iii×8 mm Westward/ Washer screw (A) from your kit and spiral information technology with the assistance of a Phillips screwdriver over the cylinder-shaped housing that is seen at the elevation of the grill. (Fig. D)

Gear up the fan blades correctly on the engine body and screw the blades nut towards the word "THIGHTEN" equally the arrows show. (Fig. E)
Join the front and back grills together past aligning the half-dozen fixing clips and push firmly until a "click" audio is heard (Fig. F).

Have the M3mm nut (C) from your kit and place it on the hex socket at the lesser of the rear grille (Fig. G), then take the M3x20 mm screw from your kit and put it on the socket on the bottom of the front grille. With the help of a Phillips screwdriver, screw the nut to secure both racks (Fig. H).

Mounting the base of operations:

Unscrew the L screw from the telescopic tube washer. Prepare the tube inside the base's round infinite.
Set the counterweight at the bottom of the base.
Fix the washer under the counterweight so that the domed role keeps touching the counterweight.(Fig. I)
Screw clockwise the Fifty spiral into the washer hole holding the telescopic tube until it is firmly tight into the base. (Fig. J)
Stand associates:
Spiral the height fixing ring counter clockwise and lift the stand internal tube until it reaches the desired pinnacle. The maximum fan height is 53.15 in.
Spiral the meridian fixing ring clockwise until it is safely tight in order to prepare the fan´due south tiptop.
Unscrew the fixing knob and fit the scope tube inside the engine trunk set (motor, blades and grids).
Make sure to reach the bottom of the base and spiral the fixing knob clockwise until it is firmly adjust.

Assembling the wall back up attachment:

Past using a 1/iv" drill (not included) brand two holes horizontally aligned with 1.57 in of separation (information technology is not recommended to install the wall back up attachment on prefabricated walls or not stable walls).

Insert in every hole a 1/4" plastic dowel (included), then insert in each plastic dowel a 1/iv" x 1" spiral (included) no more ii cm deep (S1).
Set the previously ensemble trunk with grids and blades on the wall support attachment (S2) and tight it from behind with the fixing knob (S3).
Finally ready the display on the previously gear up wall screws (S4) and make sure it is properly set (S5).

Swing pin:
The swing pin may not exist assembled to the engine body. Observe the swing pivot within ane of the plastic bags that contain parts of the fan. Innovate the pivot inside the engine body hole assigned for it and push down firmly until a "click" audio is heard and make sure the pivot is correctly assembled. (Fig. Thou)

Operation mode

• Brand sure to set up the fan on a stable and firm surface, avert rugs or carpets where it tin can tangle. Make sure the unit of measurement is properly plugged to the electrical power supply, not before you verify the appliance is off.
• In society to start the fan push the speed button desired: 1=Low; ii=Medium; 3=Loftier
• In society to refresh big rooms, our recommendation is to use oscillating mode by pulling the swing pin upward to kickoff oscillation and pushing down again to stop it.
• The fan's head bending can exist horizontally adapted by pulling the swing pivot upwards then that it will move on 150 oscillation range and then you can gear up it to the desired position by pushing the pivot downwardly in. Make sure before starting the operation of the fan than information technology is set more than three.94 in away from whatever strange object which may block the air flow, such as a walls, defunction or furniture.

Attending: Make sure to plough off the fan by pushing the off push button "0", before you lot decide to motility it to another place.

Airplane pilot light / Night light
The airplane pilot light helps you lot locate the fan on the darkness. You turn it on by pushing the button "Fifty" one time, as you turn information technology off past pushing the off button "0" in one case.

CLEANING AND MAINTENANCE

• Remember to unplug the fan from the electric power supply every fourth dimension after finishing using it.
  In club to clean the fan exterior make sure to apply a dry piece of cloth lightly wet with a soft liquid soap. Never submerge the fan in h2o or any other fluid, nor let any water leak into the inside of the fan. Avoid using either corrosive or flammable substances such as gasoline, thinner, etc. since this damage the fan and produce toxic vapors, as well.
• Nosotros recommend to follow these steps in lodge to clean the blades:
  1. Remove the front grid.
  2. Clean the blades with a dry piece of textile lightly wet with a soft liquid lather.
  3. Make sure to put back the safe grill's fixing locks and that these firmly holds both grills (front and back). Make sure the fan is completely dry out before starting it once more.

STORAGE

Make certain to turn the "stand fan" off. Make certain the blades of the "stand up fan" are completely stopped. Brand certain not to tangle around the appliances the electric power cord, coil it in circles without forcing information technology. Storage both appliances in a clean a dry space, and keep information technology always in a vertical position.
This product employs overload protection (fuse). A blown fuse indicates an overload or short-circuit situation. If the fuse blows, unplug the production from the outlet. Supersede the fuse as per the user servicing instructions (follow product marking for proper fuse rating) and check the product. If the replacement fuse blows, a brusk-circuit may be present and the product should exist discarded or returned to an authorized service facility for examination and/or repair.

Fuse Replacement:

1. Grasp plug and remove from the receptacle or other outlet device. Practise non unplug by pulling on string.
2. Open fuse cover by sliding open fuse access cover on top of zipper plug towards blades. See Fig two.
3. Remove fuse carefully. Use a pocket-size tool to pry the end of the fuse from holder cavity. Be careful not to break drinking glass window.
4. Replace fuse. Alert: Risk of fire. Supercede fuse but with identical 2.v or v.0 Amp, 125 Volt fuse (3.6mm 10 10mm).
5. Be sure fuse is properly seated within its cavity. Close fuse embrace by sliding information technology back to its original closed position.

Limited Warranty

This unit of measurement is guaranteed to the original retail purchaser confronting defects in quality or workmanship for a period of i year from the date of original purchase. If this unit fails considering of a manufacturing defect within 30 days of purchase, return the unit, with your receipt, to the retailer. Later 30 days, but inside the warranty menstruum, if the unit was purchased within the continental U.s., return it, freight prepaid, to World and Main for repair or replacement. If the unit was purchased outside the continental United States, return the unit to the identify of purchase. This warranty does not embrace impairment caused by misuse, corruption, overheating or alteration. Repairs fabricated past anyone other than World and Main are not covered in this warranty. World and Main volition not be held liable for any losses due to neglectful performance. All implied warranties, including the warranties of merchantability and of fitness of purpose, if applicable, are hereby express in duration to the period of one year from the date of original retail purchase. Some states do not permit limitations on how long an unsaid warranty lasts, then the above limitations may not apply to you. Incidental or consequential damages arising from a breach of either express or unsaid warranties are hereby disclaimed and excluded. Some states do non allow the exclusion of limitation of incidental or consequential damages, and so this limitation or exclusion may not use to y'all. Upon the expiration of this warranty all such liability volition end. No other warranties are expressed or implied.
This warranty gives yous specific legal rights, and you lot may also accept other rights which vary from state to country. No informal dispute settlement mechanisms are bachelor. This limited warranty is given in lieu of all other warranties.
Manufactured for :
World and Main (Cranbury), LLC
324A Half Acre Rd.
Cranbury, NJ 08512 USA
800-221-6895
www.comfortzoneproducts.com
Rev. 092718
Country of origin : MÉXICO

Documents / Resources

References

• Heaters | Fans | Comfort Zone Products – Comfort Zone, H2 Brands Group

Source: https://manuals.plus/comfort-zone/18-inch-2-in-1-performace-stand-ultra-silence-pedestal-fan-manual

Share this post